1270nm/R1330nm Network Solution 60km Optical Transceiver SFP SMF Module
60Km Transceiver Network Solution Products Fetures:
● Hot pluggable
● Support 9.95Gb/sto11.1Gb/s bit rates
● Below<1.8w power consumption
● XFPMSA package with LC connector
● Digital Diagnostic Monitor Interface
● Very low EMI and excellent ESD protection
● Un-cooled 1270nmDFB laser and APD receiver
● +3.3V single power supply
● operating temperature range0°Cto70°C
● No reference clock requirement
APPLICATIONS
●10GBASE-BX10.3125Gb/s Ethernet
●10GBASE-BX9.953Gb/s Ethernet
●SONETOC-192 &SDH STM I-64.1
STANDARD
● XFPMSA Compliant
● SFF-8472reversion9.5compliant
● IEEE802.3-2005compliant
● TelcordiaGR-468-COREcompliant
● FCC47CFRPart15,Class B compliant
● FDA21CFR1040.10and1040.11,class1com-pliant
● RoHS compliant
Optical Module 60km BIDI Specification
| Fibre type | SMF |
| Standard Temperature | 0°Cto+70°C |
| Power supply | 4V |
| Distance | 60Km |
| Form-Factor | SFP |
| Wavelength | 1270/1310 nm |
| Diagnostic | Yes |
| Optical Extinction Ratio | 3.5dB |
Description
The XFP modules implement the 2-wire serial communication protocol as defined in the XFPMSA.
The serial ID information of the XFP modules and Digital Diagnostic Monitor parameters can be accessed through the I2C
interface at address A0handA2h. The memory is mapped in Table1. Detailed ID information(A0h) is listed in Ta-ble2. And the
DDM specification(A2h)is described in Table3. For more details of the memory map and byte definitions, please refer to the
SFF-8472(Rev9.3,Aug.2002), “Digital Diagnostic Monitoring Interface for Optical Transceivers”.
The DDM parameters have been internally calibrated.
